CO2 Refilling Station Charging Adapter to Small Welding Tanks,W/ 1.5 Meters Soft Hose 250Bar Gauge W21.8-14

Type:W21.8-14 How it works: In order to use it correctly, please follow our instructions: 1. Cool for the Cylinder in the freezer for 1 hour. 2. the connection to a commercial CO2 gas cylinder. 3. Disconnect the quick connector of the black adapter, and then tighten the black adapter to for the cylinder( must turn the knob on the top of the black adapter to the highest position,the whole process does not need to turn the adapter knob down to open for the cylinder,If the adjusting rod press down 6mm wide valve pin, this close the valve and CO2 cannot enter) 4. Connect the quick connector 5. For most big cylinders: turn the big cylinder upside down or lie it down.(some host tank has not the dip/syphon tube inside.) 6. Carefully Open the valve of the large gas bottle(The valve on for the Cylinder closes the if it is opened to much. This happen if you open the big cylinder much / fast. The trick is to open the big cylinder very carefully. You hear the air . So to fill it successfull) 7. After about 15-20 sec., The cylinder is completely filled 8. Close valve of the large gas bottle 9. Opening the bleed to drain residual gas 10. Unscrew the CO2 - done Colour:Black Material:Metal Package Contents: 1 * Charging Valve Connector Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Please check your tank thread before making order. OD:22mm W21 8-14 / DIN477 / m22-14of your large CO2 tank. common in:Russia , Korea Japan , UK , Switzerland ,Sweden , Ukraine , Germany . South AfricaCzech Republic , Singapore etc . This item is used to refill your small / Co2 tanks from your large tanks so that you can refill your small tanks easily . CO2 Refilling Station Charging Adapter Charging Valve Connector